Reviewed 19 September 2026Quick answer: the "Water Eject" downloads found in shortcut galleries are community-made Siri Shortcuts, not an official Apple feature. They generally use audio playback through the iPhone speaker. You can try our browser sound without installing a shortcut. Audio and actions vary between downloads; we have not established that our sweep matches a particular one.
Browser sound toolWater-eject tone
A gentle 165–230 Hz sweep generated on this device.
Three 30-second runs with short pauses in between. Keep this tab open for the whole sequence.
Ready to play
Begin at a comfortable volume. Stop if the sound is uncomfortable or distortion gets worse.
Hearing nothing?
- On iPhone, turn off the silent switch (or Silent mode in Control Center); it can mute browser audio.
- Raise the media volume with the side buttons while the tone is playing.
- Disconnect Bluetooth headphones or speakers so the sound plays from the phone itself.
Sound played but nothing changed?
Stop repeating the tone if the speaker sounds the same or worse. A sweep cannot establish that the phone is dry or repair hardware damage. Continue with the wet-phone drying and repair decision guide.
What is the Water Eject Siri Shortcut?
Search results for "water eject shortcut" include community downloads on sites such as RoutineHub and ShortcutsGallery. Apple Watch has a documented Water Lock water-ejection feature, which can make the similarly named iPhone downloads look official when they are not.
Apple's current iPhone and Shortcuts support pages do not document an Apple-provided Water Eject shortcut or iOS button. Downloads in shortcut galleries come from independent creators. Apple documents that Apple Watch plays tones to clear its speaker, but it does not publish an exact frequency on the support page cited below.
How do these shortcuts work?
There are many variants, so inspect the actions in the specific download you are considering. Depending on its actions, a shortcut may:
- Raise the media volume, sometimes to maximum.
- Play an embedded low-frequency audio file (often described as a 165 Hz tone or a sweep) through the iOS media player.
- Vibrate the phone or show a notification when playback ends, and restore the volume.
The intended mechanism is speaker diaphragm vibration. The browser player above also creates sound through speaker movement, but we have not established that it matches a particular shortcut's waveform or result.
Safety checklist for downloading third-party shortcuts
If you still prefer to install a Siri Shortcut for offline access, follow these security practices before running any downloaded shortcut:
- Inspect the actions before running: In the Shortcuts app, tap the three dots (
...) on the shortcut card to inspect every action. - Check permissions: playing a tone needs little more than audio and volume actions. Be cautious with any shortcut that asks for Contacts, Photos, Safari data, Location, or network requests; a water-eject shortcut has no obvious need for them.
- Verify the source: Check the author, update history and actions. Gallery ratings alone do not establish safety.
Next steps if your speaker is still muffled
Whether you use a Siri Shortcut or this browser tool, clearer sound would not establish that the charging port or internal parts are dry. If your phone was recently dropped in water, read our complete wet-phone guide for manufacturer drying steps, model-specific positioning, and non-water spill care.
If you prefer a local audio file instead of installing a Shortcut, use our original downloadable WAV files. Their frequency range, duration and format are published on the page.